This package enables a reprogrammed stock ECU and a specially modified K-Pro to
work together to allow full tunability of supported drive by wire S2000
vehicles.
It consists of three parts:
A KPRO fitted to a Hondata/ End-User supplied compatible ECU
The Dual Adapter Cable
Reflashing of your stock ECU
There are three (3) ways to purchase this product:
Dual Adapter Harness & KPRO installed in a new ECU
Dual Adapter Harness & KPRO installed in a customer supplied ECU
Dual Adapter Harness and customer supplies KPRO & ECU
Note: These prices include the Dual
adapter harness, reflashing the stock ECU, and modifying the circuitry of both
ECUs to work together. Customers that already have a Hondata reflash, can deduct $100.00 from the total.
Engineered to maximize
exhaust flow and increase both horsepower and torque throughout the entire RPM
powerband. Skunk2's unique design is the result of over a decade of racing experience
coupled with computerized modeling and extensive dyno testing. Each Skunk2
MegaPower header features equal length, sequentially-paired, stepped primaries
and a 4-2-1 Tri-Y design with a 2.5 inch collector. These features provide an
extremely broad powerband that can be used on a wide range of engine sizes and
configurations. Each header is constructed from T-304 stainless steel with fully
polished, mandrel-bent tubing and a CNC-machined flange for added strength and
durability.
Aeromotive regulators beat the competition with the best of all worlds:
Outstanding, consistent performance from equipment that’s built to
last.
Aeromotive delivers more flow than similar regulators thanks to a
custom, convoluted diaphragm that maximizes piston stroke while
minimizing stress. Every model uses a poppet designed specifically for
that regulator, and a diaphragm fabricated from a proprietary elastomer
material. The standard vacuum boost port delivers perfect 1:1 boost
reference and makes these regulators ideal for turbo-charged and
supercharged engines.
Get a FREE!!Hondata "Heat Shield" Intake Manifold Gasket with the purchase of a Skunk2 "Pro Series" Intake Manifold and King Motorsports Intake Manifold Stud Kit.
Dont worry... were not trying to sell you stuff you dont need. The Intake Manifold Stud Kits are important because there just is not enough room on the factory studs to accomodate the extra thickness the Hondata Gasket. The kit includes washers made from the same material as the Hondata Intake Manifold Gasket to keep the heat, from the hardware, from transfering into the manifold.
King Motorsports Intake Manifold Combo w/ Stud Kit $300.00
King Motorsports Intake Manifold Combo w/ out Stud Kit $250.00
MUGEN OF JAPAN DID SOME END OF THE YEAR HOUSE CLEANING AND SENT US THESE ITEMS!
ONLY 1 SET LEFT MF10s: 15x6.5, 5x114.3, +45, Bronze - 2 sets of 4 SOLDMF10s: 17x8, 5x114.3, +45, Bronze - 1 set of 4, 1 single SOLDMF10s: 17x8, 5x114.3, +55, Bronze - 1 set of 4 MF10s: 17x8, 5x114.3, +55, White - 2 sets of 4 ONLY 4 LEFT MF10s: 17x8.5, 5x114.3, +59, Bronze - 2 sets of 4 MF8s: 16x7, 4x100, +43, Silver - 1 set of 4 MF8s: 16x7, 5x114.3, +52, Silver - 1 set of 4 97+ Prelude: Rear Spoiler - 4 SOLD97+ Prelude Under Spoiler
These items are out of production - when they're gone, they're gone. Please check fitment before ordering - NO RETURNS
You’ve heard the buzz – and it’s true! A one-time-only run
of 16 inch Mugen MF-10s made from the original
molds and material specs will be available mid to late
January, 2009. We will be receiving 50 sets of Bronze MF-10s in the popular 16x7, +43mm
offset, in the 5 x 114.3 lug pattern. When these are gone, they are
gone… we will not be making another production
run.
Fitment is for 97-01 Acura Integra Type R. These will also
fit 90-01 Acura Integra and 88-00 Honda
Civic/CRX, but these applications will require the 5-lug conversion. Although
these wheels will fit any Honda or Acura with 5x114.3mm lug pattern, they’re
only available in the +43mm offset – so check
before ordering as their will be NO RETURNS.
This limited production run of the coveted Mugen MF-10 is
ONLY available through King Motorsports. They are not available through, Mugen
of Japan, other retailers or anywhere in Europe. We have reserved these wheels for our customers only. In order to offer this
sought-after wheel while still maintaining exclusivity for those making this
investment, Mugen and King Motorsports have agreed to a SINGLE RUN of 50 sets.
For those of you looking for 17 inch MF-10s, King
Motorsports is in the beginning stages of negotiating a similar run of 17x8, +45mm offset, also using the 5 x 114.3 lug pattern. Please check our website for updates on these wheels.
Wheels will be sold in sets of 4 only and include valve
stems and black center caps. Wheels require
Mugen lug nuts with straight taper seats.
We are taking pre-orders now and wheels will be sold on a
first-come, first-served basis. Orders for MF-10s must be placed via phone only
with valid credit card – no internet orders. Reserving a set of MF-10s requires
a $1,500 down payment at time of order. Delivery to our facility is scheduled
for late January 2009. Local pickup is available, shipping is additional.
Supertech valve springs are made with premium Superclean Chrome Silicon Vanadium Steel allowing for higher performance, durability and better memory at high rpms. Computer designed to ensure that wire stress levels do not overpass the limits of stress defined in the diagrams of fatigue for excellent durability under extreme conditions.
Computerized engineering also allows Supertech to make sure that the harmonics are well under control.
Spring sets are dual spring sets unless otherwise noted.
For a limited time Hondata has bundled an OBD1 ECU with built in OBD2 adapter harness with an S300. With no external cables adapter cables to fit or break; no socketing or soldering, the Hondata OBD2/S300 bundle is a great off the shelf solution. OBD1 ECU with integrated OBD2A or OBD2B connector
Pre-installed Hondata S300
Internally upgraded with boost control circuitry
New show quality replacement lid
This turnkey solution is based on a remanufactured Honda OBD1 ECU that is plug and play. All socketing, testing and installation is done by Hondata.
